What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 09:15
The other is “what does a “fuse” do?”
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
The bolt then partially travels down the line to your home.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What kind of person makes you think "how come there are people like that"?
These are simplified answers to the original question, and does not change anything I wrote above.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Barnstars:
At least they know the answer if they wanted it.
what exactly is a ‘surge’ protector?
First Sentence:
Now when you have a certain ac resistance, then a current flows in a loop.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Do you usually wear your panties over or under your pantyhose?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Do you like wearing short skirts?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Because the load is inductive, the current lags the voltage.(by a bit).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What makes you feel guilty the most?
It also is a device that limits the change in current flow.
One
This is where the MOV conducts again, and dissipated the energy.
These glowing axolotls may hold the secret to human limb regeneration - The Washington Post
2024–10–10[John johnson John Johnson ]
What is lightning?
He then asserts :
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There are two important concepts here.
What does a fuse do?
What is unattractive about a nice guy? Why do some women don’t choose nice guys?
[image of Common-mode choke]
This one hit behind the barn.
An AC voltage/ current source, and an ac inductive load.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
He then describes Rainy Season and Lightning.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But… the neutral is now “floating” because of the 1 ohm resistance.
Here is a simplified AC power diagram.
A fuse is a non-resetable over current circuit protector.
These devices are installed between the “hot” and “neutral” and protective ground.
There are three different concepts here that are getting confused.
The third is lightning and “how it gets conducted into a home.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
For this case there are devices called Metal oxide varistors (MOV).
This device then solves the entire problem.
I post the exact comment here.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes the function of a fuse.
eight
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
So, the voltage could go up to 500 volts, and the fuse will not open up.
a photo is worth a thousand words.
One is “what exactly is in a ‘surge protector’ ? ”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
Upvotes:
nine
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It seems Mohan does not understand the difference between a comment and an Answer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but I think this circuit , shows a few more pieces.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
A circuit breaker is similar, but is resettable.
2024–10–14 [Omar Gharbi Omar Gharbi ]
In schematic diagrams this is the symbol for a fuse:
(Dc diagram shown, AC is similar).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But it can get overloaded, and no longer works.
so, what happens?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
but this device (an Inductor) … impedes the rapid changes in the current.
This is 'the assistant's answer'